Pre-Built Set Up Guide
If you purchased a pre-built PC, use this guide to get your new build up and running properly.
Jordyn
Last Update منذ عامين
Packaging Materials
- Remove any foam and/or shipping materials from the inside of your PC.
Display Cable
- Plug your display cable from your monitor into the GPU and not the Motherboard as displayed in the photo.
WiFi
- Grab the antennas from the PC Crate branded box and screw them into the WiFi adapter card or motherboard located on the rear of your PC.
Power Supply
- The power cord for your PC is located in the PC Crate branded box.
- Plug the prong side into the wall, and the trapezoid shaped side into the back of the PC.
- Make sure the switch on the power supply (see image 1) is in the ON position. This is indicated with a straight line with the OFF position being indicated with a circle.
Geforce Experience Setup
- Create an account with Nvidia and use it to sign into the “Geforce Experience.” This program will be used to keep the drivers for your new GPU up to date and keep your PC’s performance in tip top shape!
- You can also use this program to automatically optimize the graphics settings for any games you install. This can be extremely helpful for new PC gamers as there are a LOT of confusing graphics settings and this helps to take the guesswork out of turning them up as high as your PC can handle.
Audio Tips
- If you ever need to plug headphones or a microphone into the PC, we recommend using the ports on the back of the motherboard if possible, instead of the ones on the front panel. They will tend to have better audio quality over the ones on the case itself.